TM 11-5821-333-30
6-31. TEST ADAPTER CONNECTORS.
c. Replacement of Connector J9
Continued
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Expendable Supplies
Tool Kit, Electronic Equipment, TK-105/G
Tiedown Straps
Solder
Equipment Conditions
Interconnecting device removed from chest (paragraph 6-22).
REMOVAL
INSTALLATION
1.
2.
3.
4.
Use diagonal cutting pliers. Cut and remove
1.
any tiedown straps that interfere with unsold-
ering wires from connector.
2.
Tag wires, and unsolder wires from connec-
tor.
Use spanner wrench. Remove spanner
(1), securing J9 (2) to front panel (3).
Remove J9.
3.
nut
4.
Insert new connector in front panel J9 open-
ing,
Use spanner wrench. Thread and tighten
spanner nut (1) on J9 connector (2).
Solder wires to connector.
Replace any tiedown straps removed.
6-198
