TM 11-5821-333-30
6-39. TEST ADAPTER VOLTAGE REGULATOR U1 AND SOCKET
This task covers: a. Removal
b. Installation
Tools
Expendable Supplies
Tool Kit, Electronic Equipment, TK-100/G
Solder
Tool Kit, Electronic Equipment, TK-105/G
Interconnecting device removed from chest (paragraph 6-22).
1.
REMOVE U1
a. Loosen and remove screw (1) and lock-
washer (2).
b. Loosen and remove screw (3), two lock-
washers (4 and 7), flat washer (5), and
nut (6) securing loop clamp (8). Discard
Iockwashers.
c. To unseat U1 , apply pressure to pins us-
ing blade of flat-tip screwdriver.
d. Remove U1 from socket.
2. REMOVE SOCKET.
a. Remove Cl and C2 (para 6-41).
b. Refer to step 1, and remove U1.
c. Tag wires soldered to socket.
d. Unsolder wires from socket.
e. Remove socket.
1.
INSTALL U1 .
a. Plug U1 into socket.
b. Install screw (1) and Iockwasher (2).
c. Install screw (3) and Iockwasher (4).
d. Install flat washer (5), Iockwasher (7), nut
(6), and loop clamp (8) on screw (3).
2. INSTALL SOCKET
a. Position socket on of panel (9).
b. Solder wires to terminals of socket.
c. Remove wire tags.
d. Plug U1 into socket.
e. Install screws (1 and 3) and Iockwashers
(2 and 4).
f. Loosely install flat washer (5), Iockwasher
(7), nut (6), and loop clamp (8).
g. Install Cl and C2 (para 6-41).
6-216
