TM 11-5821-333-30
6-29. TEST ADAPTER RF CABLES. Continued
c. Removal and Installation of N Type Connectors
This type of connector is found on at least one end of rf cables W2, W7, and W 14 through WI 7.
This task covers: a. Removal
b. Installation
REMOVAL
1. Twist connector plug (1) CCW until threads
are disengaged.
2. Pull plug clear of jack (2).
INSTALLATION
1. Slide plug (1) onto jack (2). Turn CW until
threads are engaged.
2. Turn plug CW until tight.
d. Removal and Installation of SMA Type Connectors
This type of connector is found on at least one end of rf cables W3 through W6, W8 through W13, W16, and W17.
This task covers: a. Removal
b. Installation
REMOVAL
1.
Turn plug (1) CCW until threads are disen-
gaged, If necessary, use a wrench to loosen
plug.
2. Pull plug clear
INSTALLATION
1. Slide plug (1)
of jack (2).
onto jack (2) and turn until
threads are engaged.
2. Turn plug CW until tight.
e. Removal and Installation of Front Panel Mounted Connectors
This type of connector is found on at least one end of rf cables W2, W4, W7, W12, W14, W15, and W22 through
W28.
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Tool Kit, Electronic Equipment, TK-100/G
6-192
