TM 11-5821-333-30
6-28. TEST ADAPTER
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Tool Kit, Electronic Equipment, TK-100/G
Tool Kit, Electronic Equipment, TK-105/G
REMOVAL
INSTALLATION
1.
2.
3.
4.
5.
Remove interconnecting device from chest
(para 6-22).
Remove reference rt from test adapter (para
6-23) .
Remove ics from test adapter (para 6-24).
Remove reference rcu from test adapter
(para6-25).
Remove reference dra (para 6-26) from test
1, Install reference dra (para 6-26) in test
adapter.
2, Install reference rcu in test adapter (para
6-25) .
3. Install ics in test adapter (para 6-24).
4. Install reference rt in test adapter (para
6-23) .
5. Install interconnecting device in chest (para
adapter.
6-22) .
6-29. TEST ADAPTER RF CABLES
This paragraph gives the procedures for removing or installing rf cables in the test adapter. Paragraph 6-29a
gives the general procedures for replacing cables. The other paragraphs give specific instructions for removal
and installation of each type
TYPE
TPS
N
SMA
Front panel mounted
Terminal lug and wire
of connector used on the rf cables. These connector types are:
PARAGRAPH
6-29.b
6-29.c
6-29.d
connector
6-29.e
connection
6-29.f
Two wire connection
6-29.g
a. Removal and Installation of Rf Cables W2 through W6 and W8 through W36
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Expendable Supplies
Tool Kit, Electronic Equipment, TK-100/G
Tiedown Straps
Tool Kit, Electronic Equipment, TK-105/G
Equipment Conditions
Interconnecting device removed from chest (paragraph 6-22).
6-190
