TM 11-5895-1090-34/TO 31 R2-2TSC-152
3-8.
Shf Combiner Assembly A1
(2) Remove hex nut securing rear of
socket base to front panel.
Direct support repair procedures for shf combiner Al is
(3) Install new socket and secure with hex
limited to removal and replacement of shf channel
nut. Reconnect leads.
assemblies A1A1-A1A4. Refer to figure 3-1 and the
(4) Replace fuse in socket if necessary
following procedures to remove and replace these
and replace socket cover.
assemblies.
Figure 3-1. Amplifier-Mixer Shf Combiner Assembly A1. Component Location.
3-6
