TM 11-5820-922-40-1
4. Use solder sparingly. Excess
6. Check the work. Be certain that
solder should be removed with the
the solder joint is firm and clean.
recommended solder-removing tool, or
equivalent.
MATERIALS. For repair to the circuit
cards, the tools listed in table 3-1 and
5. Clean and tin the leads of a com-
ponent before soldering the component to
the materials listed in table 3-2 are
recommended.
the board.
RECOMMENDED TOOLS
Tool
Manufacturer
Part Number
Bench repair center
Pace Inc.
PRC-350C
Kit, tool, electronic
...
TK-100/G
Maintenance kit, printed circuit
MK 984/A
...
Clamps, small
...
...
Coining tool
Erem
5174
Oven capable of maintaining
...
...
150 10 F
Parallel gap welding machine:
MCW 550
...
Welding head
...
VTA66
RECOMMENDED MATERIALS
Material
Manufacturer
Type
Acetone solvent (acetone)
...
...
Epoxy compound (Epon packaged in
Frey Engineering
a plastic syringe, DTA catalyst
in a glass vial)
Epoxy adhesive
Narmco
3135A and B kit
Epoxy adhesive kit, flexible,
Narmco
3135
frozen pre-mix (Narmco
adhesive kit)
