INTRODUCTION
1-1. Scope
Code
Explanation
This manual lists repair parts and special tools
PD -- Support item, excluding support equipment,
required for the performance of direct support,
procured for initial issue or outfitting and
general support, and depot maintenance of the
stocked only for subsequent or additional
initial issues or outfittings. Not subject to
AM-1881/U and AM-3026/U. The PCCN for the
automatic replenishment.
equipment is GTEAGD for all models.
PE -- Support equipment procured and stocked for
NOTE
initial issue or outfitting to specified main-
The AM-3026/U is identical to the AM-
tenance repair activities.
188/U, except that the AM-3026/U is rack
PF-- Su
pport equipment which will not be stocked
mounted,
but which will be centrally procured on
1-2. General
demand.
PG -- Item procured and stocked to provide for
This repair parts and special tools list is divided into
sustained support for the life of the
the following sections:
equipment. It is applied to an item
peculiar to the equipment which because
parts authorized for the performance of mainte-
of probable discontinuance or shutdown of
nance at the direct support, general support, and
production facilities would prove un-
depot level. This repair parts list is arranged in
economical to reproduce at a later time.
alphabetical order.
KD -- An item of depot overhaul/repair kit and not
b. S p e c i a l Tools, Test and Support
purchased separately. Depot kit defined
Equipment - Section III. Not applicable.
as a kit that provides items required at the
c. Index - Federal Stock Number and Reference
time of overhaul or repair.
Number Cross-Reference to Figure and Item
KF -- An item of a maintenance kit and not
purchased separately. Maintenance kit
sequence, of all Federal stock numbers appearing in
defined as a kit that provides an item that
the listings, followed by a list, in alphanumeric
can be replaced at organizational or direct
sequence, of all reference numbers appearing in the
support or general support levels of
listings. Federal stock number and reference num-
maintenance.
bers are cross-referenced to each illustration figure
KB -- Item included in both a depot over-
and item number or reference designation appear-
haul/repair kit and a maintenance kit.
ance.
MO -- Item to be manufactured or fabricated at
organizational level.
MF -- Item to be manufactured or fabricated at
The following provides an explanation of columns
direct support maintenance level.
found in the tabular list.
MH -- Item to be manufactured or fabricated at
a. Source, Maintenance, and Recoverability Codes
general support maintenance level.
(SMR.
MD -- Item to be manufactured or fabricated at
(1) Source code. Indicates the manner of acquir-
depot maintenance level.
ing support items for maintenance, repair, or
AO -- Item to be assembled at organizational level.
overhaul of end items. Source codes are --
AF -- Item to be assembled at direct support
Explanation
CODE
maintenance level.
PA -- Item procured and stocked for anticipated or
AH -- Item to be assembled at general support
known usage.
maintenance level.
PB -- Item procured and stocked for insurance
AD -- Item to be assembled at depot maintenance
purposes because essentiality dictates
level.
that a minimum quantity be available in
XA -- Item is not procured or stocked because the
the supply systems.
requirements
for the item will result in
PC -- Item procured and stocked and which
the replacement of the next higher as-
otherwise would be coded PA except that
sembly.
it is deteriorative in nature.
