INTRODUCTION
Code
Explanatian
1-1. Scope
This manual lists repair parts and special tools
P D - Support item, excluding support equipment,
required for the performance of organizational
procured for initial issue or outfitting and
maintenance of the AM-18881/U and AM-3026/U. The
stocked only for subsequent or additional
PCCN for the equipment is GTEAGD for all models.
initial issues or outfittings. Not subject to
NOTE
automatic replenishment.
The AM-3026U is identical to the AM-
PE - Support equipment procured and stocked for
1881/U, except that the AM-3026U is rack
initial issue or outfitting to specified main-
mounted.
tenance repair activities.
P F - Support equipment which will not be stocked
1-2. General
but which will be centrally procured on
This repair parts and special tools list is divided into
demand.
the following sections:
PG - Item procured and stocked to provide for
a. Prescribed Load Allowance (PLA) - Section II.
sustained support for the life of the
Not applicable.
equipment. It is applied to an item
b. Repair Parts List - Section III.. A list of repair
peculiar to the equipment which because
parts authorized for the performance of mainte-
of probable discontinuance or shutdown of
nance at the organizational level. This repair parts
production facilities would prove un-
list is arranged in alphabetical order.
economical to reproduce at a later time.
c. Special Tools, Test and Support Equipment
KD - An item of depot overhaul/repair kit and not
Section IV. Not applicable.
purchased separately. Depot kit defined
d. Index - Federal Stock Number and Reference
as a kit that provides items required at the
Number Cross-Reference to Figure and Item
time of overhaul or repair.
Number - Section V. A list, in ascending numerical
K F - An item of a maintenance kit and not
sequence, of all Federal stock numbers appearing in
purchased separately. Maintenance kit
the listings, followed by a list, in alphameric
defined as a kit that provides an item that
sequence, of all reference numbers appearing in the
can be replaced at organizational or direct
listings. Federal stock number and reference num-
support or general support levels of
bers are cross-referenced to each illustration figure
maintenance.
and item number or reference designation appear-
K B - Item included in both a depot over-
ance.
haul/repair kit and a maintenance kit.
MO - Item to be manufactured or fabricated at
organizational level.
The following provides an explanation of columns in
M F - Item to be manufactured or fabricated at
the tabular lists --
direct support maintenance level.
a. Source, Maintenance, and Recoverability Codes
MH - Item to be manufactured or fabricated at
(SMR).
general support maintenance level.
(1) Source code. Indicates the manner of acquir-
MD - Item to be manufactured or fabricated at
ing support items for maintenance, repair, or
depot maintenance level.
overhaul of end items. Source codes are --
AO - Item to be assembled at organizational level.
Code
Explanation
A F - Item to be assembled at direct support
maintenance level.
P A - Item procured and stocked for anticipated or
A H - Item to be assembled at general support
known usage.
maintenance level.
P B - Item procured and stocked for insurance
A D - Item to be assembled at depot maintenance
purposes because essentiality dictates
level.
that a minimum quantity be available in
the supply systems.
XA - Item is not procured or stocked because the
P C - Item procured and stocked and which
requirements for the item will result in
the replacement of the next higher as-
otherwise would be coded PA except that
sembly.
it is deteriorative in nature.
2
