TM 11-5821-333-30
4-20. CONNECTOR HOUSING (A6)
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Tool Kit, Electronic Equipment, TK-105/G
REMOVAL
INSTALLATION
1. Remove four screws (1) and four washers (2)
1. Position connector housing (3) on two guide
that secure connector housing (3) to chassis
pins.
(4) .
2. Press down on connector housing (3) until ful-
2. Carefully pull connector housing (3) straight
Iy seated.
out.
3. Install four screws (1) and four washers (2)
that secure connector housing (3) to chassis
(4) .
4-68
