TM 11-5821-333-30
2-36. RT CHASSIS
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Tool Kit, Electronic Equipment, TK-105/G
Module Extractor, A3013669-1
REMOVAL
1. Remove top cover (para 2-29).
5. Remove power supply (para 2-30).
2. Remove front panel (para 2-34).
6. Remove lF/demodulator (para 2-32).
3. Remove ECCM module, interface module,
7. Remove tuner/mixer (para 2-32).
and switching module (para 2-31).
8. Remove synthesizer (para 2-33).
4. Remove control module (para (2-31).
9. Remove amplifier-oscillator (para 2-35).
INSTALLATION
1. Install front panel (para 2-34).
5. Install tuner/mixer (para 2-32).
2. Install control module (para 2-31).
6. Install synthesizer (para 2-33).
3. Install ECCM module, interface module, and
7. Install amplifier-oscillator (para 2-35).
switching module (para 2-31).
8. Install power supply (para 2-30).
4. Install lF/demodulator (para 2-32).
9. Install top cover (para 2-29).
2-37. RF CABLES (W3 AND W4)
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
References
Tool Kit, Electronic Equipment, TK-105/G
Figure 2-13 shows location of rf cables.
REMOVAL
INSTALLATION
1. Remove top cover (para 2-29).
1. Connect cable W3 to A8J2 and A7J3 (see
2. Remove power supply (para 2-30).
figure 2-13).
3. Use needle nose pliers to disconnect cables
2. Connect cable W4 to A7J2 and A6J1 (see
(see figure 2-13).
figure 2-13).
3. Install power supply (para 2-30).
4. Install top cover (para 2-29).
2-168
