TM 11-5821-333-30
2-24. TROUBLESHOOTING FLOWCHARTS. Continued
1. SET UP USING FIG 2-8.
2. ENSURE REF RT FUNC-
TION SWITCH IS SET TO
STOW.
3. SET TEST ADAPTER:
S2
OFF
TEST EQPT
INPUT
EXT
4. USE X1 PROBE AT
W15J1-13. READ DMM.
CHART 44
Power On/Off Test Failure
NOTE
See figure FO-10 for
location of test points.
1. SET TEST ADAPTER:
DC
OFF
2. REMOVE AMPL-OSC (A9)
FROM UUT.
3. USE DMM AND TEST
LEADS TO MEASURE RE-
SISTANCE BETWEEN
W15J1-3 AND J1-43.
CHASSIS (A11) IS BAD.
2-152
