TM 11-5820-801-30
a.
RF Tests.
(b) Slide open the four mounting slide
(1) Remove Pump Source Module 2A1 from
clips on 2A1 (fig. 3-12) and lift Module 2A1 out of
Unit 2 as follows.
Support Frame 2A5.
(a) Remove the four cap screws in each of
(c) Place 2A1 in a convenient position to
the two pump waveguide interface flanges at the
connect test equipment to the pump waveguide flanges.
(d) Do not remove W2P2 from 2A1JI.
interfaces with 2A2 and 2A3 pump waveguides Refer to
3-29
