TM 11-5821-333-30
3-10. TROUBLESHOOTING FLOWCHARTS. Continued
1. SET UUT AND REF RT:
FUNCTION
STOW
2. SET TEST ADAPTER:
DC
OFF
3. REMOVE PROCESSOR
MODULE (A3) FROM
UUT.
4. SET TEST ADAPTER:
DC
ON
5. SET UUT AND REF RT:
FUNCTION
SQ ON
6. USE X1 PROBE AT
XA4-15. READ DMM.
CHART 1
Display Blank (Sheet 13 of 18)
1. SET TEST ADAPTER:
DC
OFF
2. SET UUT AND REF RT:
FUNCTION
STOW
3. REINSTALL PROCESSOR
MODULE (A3).
4. REMOVE INTERFACE
MODULE (A2).
5. SET TEST ADAPTER:
DC
ON
6. SET UUT AND REF RT:
FUNCTION
SQ ON
7. USE X1 PROBE AT
XA4-15. READ DMM.
PROCESSOR MODULE (A3)
IS BAD.
INTERFACE MODULE (A2) IS
BAD.
3-27
