Section V. PREPARATION FOR STORAGE OR SHIPMENT
6-45. GENERAL INFORMATION
Remove the reference rt, reference rcu, and reference dra from the test adapter and pack
separately. DO NOT ship installed in the test adapter or damage may result.
a. Pack the maintenance group or any depot maintained components in approved shipping containers.
b. The lamp test CCA must be shipped enclosed in material that provides protection from static electricity.
See the following paragraph.
6-46. PACKING STATIC SENSITIVE MODULES
The following steps should be followed when packing a static sensitive module for storage or shipment.
To avoid damaging static sensitive modules, use an antistatic pad on the work surface and wear
a grounded wrist strap when handling the module.
a. Module (1)
b. Antistatic package (4)
c. Antistatic package (4)
d. Shipping container (6)
Place inside antistatic bag (2) or inside antistatic
wrapping material (3), See figure 644.
Seal with adhesive tape. Attach sensitive elec-
tronic device unit pack label (5).
Place inside approved shipping container (6).
Attach "sensitive electronic device intermedi-
ate pack label (7).