6-32. TEST ADAPTER SWITCHES. Continued
b. Replacement of Switches S7, S8, S9, S1O, S12, S13, S14, and S16.
This task covers: a. Removal
Tool Kit, Electronic Equipment, TK-105/G
Interconnecting device removed from chest (paragraph 6-22).
Remove and discard hex nut (4) and lock-
washer securing switch (5) to front panel (6),
Pull switch from rear of front panel.
Tag wires connected to switch.
Loosen and remove screws (1) and lock-
washers securing wire terminal lugs (2) to
switch leads (3).
Secure wire terminal lugs (2) to correct
switch leads (3) with screws (1) and lock-
Remove wire tags.
Insert good switch into front panel. Check for
correct switch orientation.
Thread and tighten hex nut (4) and lockwash-
er supplied with switch to secure switch (5) to
front panel (6).