TM 11-5821-333-30
6-26. REFERENCE DRA
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Tool Kit, Electronic Equipment, TK-100/G
Tool Kit, Electronic Equipment, TK-1015/G
Equipment Conditions
Interconnecting device removed from chest (paragraph 6-22).
REMOVAL
1.
Disconnect connectors P6 (1), P7 (2), P8
(3), and P9 (4) from rear of reference dra
(5) .
2. Use screwdriver and nut driver. Loosen and
remove four nuts (9), Iockwashers, and
screws and eight flat washers securing blank
panel to reference dra. Get a good dra.
INSTALLATION
1.
Use screwdriver and nut driver. Secure blank
panel (7) to good dra (5) with four nuts (9),
Iockwashers, and screws and eight flat wash-
ers.
2. Connect P6 (1), P7 (2), P8 (3), and P9 (4) to
rear of reference dra (5).
6-188