TM 11-5821-333-30
4-17. ACCESS COVER AND IDENTIFICATION PLATE
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Expendable Supplies
Tool Kit, Electronic Equipment, TK-105/G
Cotton Swab and Alcohol
REMOVAL
1, REMOVE ACCESS COVER.
a. Remove four screws (1) and four washers (2).
b. Remove access cover (3) from chassis (4).
2. REMOVE IDENTIFICATION PLATE.
a. With pocket knife, peel off identification plate
(3) .
b. With cotton swab and alcohol, clean adhesive
from chassis (4).
INSTALLATION
1. INSTALL ACCESS COVER
a. Position access cover (3) on chassis (4).
b. Install and tighten four screws (1) and
washers (2).
2. INSTALL IDENTIFICATION PLATE.
a. Peel backing from new identification plate
(5) .
b. Press into place on chassis (4).
4-65