Section V. PREPARATION FOR STORAGE OR SHIPMENT
3-21. GENERAL INFORMATION
a. Pack the rcu and modules in approved shipping containers.
b. All modules must be shipped enclosed in material that provides protection from static electricity. See the
3-22. PACKING STATIC SENSITIVE MODULES
The following steps should be followed when packing a static
sensitive module for storage or shipment.
To avoid damaging static sensitive modules, use an antistatic pad on the work surface and wear
a grounded wrist strap when handling the module.
a. Module (1)
b. Antistatic package
c. Antistatic package
d. Shipping container
Place inside antistatic bag (2) or inside antistatic
wrapping material (3). See figure 38.
Seal with adhesive tape. Attach sensitive elec-
tronic device unit pack label (5),
Place inside approved shipping container (6).
Attach sensitive electronic device intermedi-
ate pack label (7).