TM 11-5821-333-30
2-34. FRONT PANEL (A1)
This task covers: a. Removal
b. Repair
c, Installation
INITIAL SETUP
Tools
Tool Kit, Electronic Equipment, TK-105/G
REMOVAL
1.
2.
3.
INSTALLATION
Remove top cover (para 2-29).
Remove ten screws (1), four each side and
two on bottom.
Gently pull front panel from rt.
1.
2.
3.
CAUTION
Be careful not to damage or bend
connector pins.
Position front panel (2) so connector pins
are aligned, Gently push until properly
seated.
Insert and tighten ten screws (1), four each
side and two on bottom.
Install top cover (para 2-29).
2-166