(c) Any other box defect which may be
(k) Different stock numbered items in
considered minor by definition of MIL-STD-
the same unit package.
105.
(4) Packaging and marking minor.
(d) Any item of required marking in-
(a) Item not properly blocked or braced
formation other than (5)(j) through (o) above
within the unit package to prevent movement.
listed under major defects omitted, incorrect,
(b) Packaging material damaged.
or illegible.
not snug fitting and contain voids.
ment. All measuring and test equipment
shall have been calibrated and certified with-
(d) Air not expelled from barrier prior
in its prescribed period, in accordance with
to sealing.
TB 750-236 before use. Certification shall
(e) Any item of marking information
be affixed in such a way as to preclude any
other than (3)(h), (i), and (j) above listed
altering or tampering.
under major defects omitted, incorrect, or
g. Storage Inspection Records. Results of
illegible.
inspections and tests shall be recorded on
(5) Packing and marking major.
data sheets and a copy attached to each unit.
(a) Use of improper or defective ma-
terial.
midity warehouse: 60 months.
(b) Quantity in pack not as specified.
b. Heated warehouse: 36 months.
(c) Gross weight in excess of specified
amount.
c. Unheated warehouse: 18 months.
(d) Box closure not as specified.
Controlled humidity
8. Type of Storage.
(e) Type, grade, class, and style of
warehouse or heated warehouse.
the shipping container not as specified.
(f) Strapping omitted (when required).
9. Other Instructions.
a. Rejected Lots.
Each rejected lot shall be tagged and re-
(g) Strapping inadequate or incorrectly
classified into the proper condition code in
applied (when required).
accordance with AR 725-50. For other than
(h) I t e m s n o t adequately blocked,
new material, all defective units in a lot shall
braced, or cushioned within the shipping con-
be repaired, or disposition requested in ac-
tainer to prevent movement or damage.
cordance with AMC and depot procedures.
(i) Shipping documents or packing list
b. Repackaging of Samples Inspected. Re-
omitted.
store the packaging of the samples inspected
(j) Stock number omitted, incorrect, or
and accepted to the level of the lot from
illegible.
which the samples were drawn.
(k) Nomenclature omitted, incorrect, or
If the subject
10. Special Requirements.
illegible.
items are allocated for Foreign Military Sales,
(l) Marking of quantities of items in
Grant Aid, or Loan, the following additional
pack omitted, incorrect, or illegible.
requirements must be met:
(m) Destination marking omitted, in-
a. P o l i c i e s and Special Conditions.
correct, or illegible.
(n) Special marking or labeling (when
required ) omitted, incorrect, or illegible.
Title
Publication
(o) Overseas code marking (when re-
General Policies and Principles for
AR 795-17
quired) omitted, incorrect, or illegible.
Furnishing Army Materiel on a Grant
Aid Basis.
(6) Packing and marking -- minor.
AR 795-204
General Policies and Principles for
(a) Unsealed carton.
Furnishing Defense Articles and
Services on a Sale or Loan Basis.
(b) Defective taping or sealing of car-
ton.
Offer and Acceptance.
DD Form 1513
9